The MP10 Mini is a feature-rich 3D printer with a 200 x 200 cm large heated, flexible and detachable spring core plate made of steel, as well as a completely made of metal-made extruders. It has a supported level sensor on the magnetic extruder assembly that is a simple change of the Z-offset in the menu for easy and perfect first layers. The wiring is not a problem, since all components are already pre-wired and ready for use. The connections are hidden in the cable guide sleeve. Most importantly, however, is that prints crisp and clean.Full status sensor for level sensor of the pressure bed: with the level sensor is the levelling easy. Thus, differences in the bed is detected, so that you have an exact Z-offset can set. Thus, the first layers to a child game.Easily accessible magnetic extruder: The removable magnetic frame offers an easy start point for the change to a extruder system of your choice. The work on your machine is easier than ever before.Heated, detachable and flexible pressure bed: This large bed (300 x 300) is easy to heat up to 100°C and makes the removal of press easier than ever before. The magnetic platform makes the clean and remove the bed is simple and straightforward.Remove the hotend-schrauben with two screws: The access to your hotend is easy and allows for a rapid change of the tool head. Switch from a 0.4 mm nozzle to a 0.6 mm nozzle, without the need to switch to the nozzle actually Quickly, easily and conveniently.Dual-Y-Gantry: the dual-Y-Gantry offers a stable base for the printing bed and minimises the wobble, which in the case of single-Y-gantry models of 3D printers, this occurs. This leads to cleaner press and prevents you again and again for leveling.This text is machine translated.... More